logo-omniloop
RESET Air Certification

RESET Certified Air Quality Monitors, Deployed and Managed for You

RESET is the most rigorous air quality certification standard available. It requires RESET certified air quality monitors logging continuous, third-party-verifiable data across every occupied zone. Omniloop provides the sensor hardware, data logging, and compliance reporting RESET demands.

Book a RESET Consultation See IAQ Monitoring
RESET is the only air quality certification based on continuous, real-time sensor data rather than one-time tests
Growing adoption in China, Southeast Asia, and increasingly the Middle East for premium commercial buildings
RESET-certified spaces achieve 15 to 20 percent higher leasing rates in markets where certification is recognized
Unlike WELL, RESET focuses exclusively on air quality with extremely rigorous continuous monitoring requirements

RESET Air Parameters Omniloop Monitors

All five core RESET Air parameters tracked continuously, every sensor node, every zone.

PM2.5
Fine particulate matter
Less than 12 ug/m3 annual mean
CO2
Carbon dioxide
Less than 1000 ppm
TVOC
Total volatile organic compounds
Less than 500 ug/m3
Temperature
Thermal comfort range
18 to 28 degrees C
Humidity
Relative humidity
30 to 60 percent RH

What Omniloop Provides for RESET

Continuous Multi-Parameter Monitoring

All RESET Air parameters monitored 24/7. Data logged every 5 minutes across every deployed sensor node.

Third-Party Verification Ready

RESET requires data to be verifiable by third-party auditors. Omniloop's tamper-evident logs are designed for this.

Occupant Transparency Display

RESET mandates real-time air quality visibility for occupants. Omniloop provides live data feeds for lobby displays.

Compliance Reporting

Generate RESET-formatted reports showing parameter compliance across all zones for any date range.

Also Supported

WELL Certification

Occupant health across 10 concepts

LEED Certification

Energy and sustainability credits

RESET Certified Air Quality Monitors: FAQ

What are RESET certified air quality monitors?

RESET certified air quality monitors are sensor devices that meet RESET's accuracy, calibration, and continuous-logging requirements for PM2.5, CO2, TVOC, temperature, and humidity. Unlike consumer air quality monitors, they must log data every 5 minutes or faster, remain calibrated within RESET's tolerance bands, and expose that data to third-party auditors for verification. Omniloop deploys RESET-compliant sensor nodes across every zone that needs certification.

How many air quality monitors do I need for RESET certification?

RESET requires at least one certified monitor per zone type per floor, with additional nodes for larger open-plan areas. Omniloop's team calculates the exact sensor count during a site assessment based on your floor plan, occupancy density, and HVAC zoning, then handles deployment and calibration.

What air quality parameters do RESET certified monitors track?

RESET Air certification requires continuous monitoring of five core parameters: PM2.5 (below 12 ug/m3 annual mean), CO2 (below 1000 ppm), TVOC (below 500 ug/m3), temperature (18-28°C), and relative humidity (30-60%). Every Omniloop sensor node tracks all five simultaneously.

How is RESET different from WELL certification?

RESET focuses exclusively on indoor air quality with the industry's most rigorous continuous-monitoring requirements, while WELL evaluates ten broader wellbeing concepts including air, water, light, and movement. Many buildings pursue both: RESET certified air quality monitors also supply the continuous IAQ data WELL's Air concept requires.

Ready to Meet RESET's Rigorous Standards?

Book a demo and we will show you how Omniloop's sensor deployment and continuous data logging satisfies every RESET Air requirement.

Book a Free Demo Ask a Question