Smart Building Automations Without Writing a Single Line of Code
Omniloop's automation engine lets facility managers build powerful, multi-condition rules that control HVAC, lighting, and alerts based on occupancy, time, sensor thresholds, and external conditions. No integrator needed to make changes.
Four Ways to Trigger an Automation
Run HVAC on weekdays at 7am, off at 7pm. Adjust for weekends and holidays automatically.
Turn off zones when no motion is detected for 30 minutes. Restart 15 minutes before scheduled arrival.
Increase ventilation when CO2 exceeds 900 ppm. Trigger cooling when temperature rises above 26C.
Notify the facility manager and maintenance team instantly when a sensor or equipment fault is detected.
Automation Engine Capabilities
No-Code Rule Builder
Create automations using a simple If-Then interface. No programming required. Any facility manager can build and modify rules.
Multi-Condition Logic
Chain multiple conditions with AND/OR logic. For example: if CO2 is high AND occupancy is above 80% AND it is peak hours, increase ventilation by 30%.
Schedule Manager
Set recurring schedules for HVAC, lighting, and other systems. Configure exceptions for public holidays and tenant events.
Multi-Channel Alerts
Trigger email, SMS, or in-platform notifications when conditions are met. Escalate to secondary contacts if unacknowledged.
Occupancy-Driven Controls
Connect occupancy sensor data to HVAC and lighting. Systems ramp up before arrival and scale down as areas empty.
IAQ-Driven Ventilation
Automatically increase fresh air supply when CO2 or VOC thresholds are exceeded. Reduce energy waste when IAQ is good.
Example Automations
IF day is Saturday or Sunday AND time is after 2pm THEN set all HVAC zones to OFFSaves 15 to 25% of HVAC energy cost per week
IF CO2 in any zone exceeds 900 ppm THEN increase AHU speed to maximum for 30 minutesMaintains WELL and RESET air quality thresholds
IF any equipment alert fires between 8pm and 7am THEN send SMS to on-call maintenance teamReduces fault response time from hours to minutes
Start Automating Your Building Today
Book a demo and we will show you how to build your first automation in under 5 minutes using your building's live data.